Lead Forming

LF1 Horizontal Flushmount 90° Cylindrical Body

LF2 Horizontal Flushmount 90° Vertical Body Orientation

LF3 Horizontal Flushmount 90° Horizontal Body Orientation

LF4 Horizontal Stand-Off 90° Bend

LF5 Vertical Flushmount

LF6 Vertical Flushmount Diode, Cathode / Band Down

LF7 Vertical Flushmount Diode, Cathode / Band Up

LF8 Horizontal Stand-Off Lock-In Cylindrical Body

LF9 Vertical Stand-Off Lock-In

LF10 Vertical Stand-Off Lock-In Diode, Cathode / Band Up

LF11 Vertical Stand-Off Lock-In Diode, Cathode / Band Down

LF12 Wire Jumper (Bare)

LF13 Vertical Parallel Flushmount

LF14 Vertical Parallel Flushmount Diode, Cathode / Band Up

LF15 Vertical Parallel Flushmount Diode, Cathode / Band Down

LF16 Vertical Stand-Off (Short Lead Only)

LF17 Leads Cut to Length (No Bend)

LF18 Underform

LF19 Underform 90°

LF20 Straight Cut #1, Molded / Flat Bottom Body with 2 or More Leads

LF21 Straight Cut #2, Meniscus / Offset to End of Lead

LF22 Straight Cut #3, Power Transistor Pkg.

LF23 Straight Cut #4, Radial Side-Leaded Component

LF24 Straight Cut #5, TO-5, TO-6, and Other Asymmetrical-Leaded Components

LF25 Outward 90° Bend

LF26 Inward 90° Bend

LF27 Special Reducing Stand-Off #1

LF28 Special Outward Lead Spread #1

LF29 Special Outward Lead Spread #2

LF30 Opposing Loop Stand-Off

LF31 Opposing Loop Stand-Off Lock-In

LF32 Outward Stand-Off, Stress Relief Bend

LF33 Inward Stand-Off, Stress Relief Bend

LF34 Radial Flush Mount Lock-In

LF35 90° Bend

LF36 90° Bend #2, LED With Cathode Indicator

LF37 90° Bend #3, LED With Cathode Indicator

LF38 Polarized Capacitor 90°

LF39 Polarized Capacitor 90° In-Line Bend #2

LF40 TO-92 & TO-18 Formed to a TO-5 Pattern (.20” Pin Circle) Center Lead Bent Away From Flat Side

LF41 TO-92 Formed to a TO-5 Pattern (.20” Pin Circle) Center Lead Bent Toward Flat Side

LF42 TO-92 Component Formed To A TO-220 Pattern

LF43 TO-92 Component Formed to a TO-220 Pattern With Center Lead Lock-In

LF44 TO-92 Component Formed To TO-18 Pattern (.10” Pin Circle) Center Lead Bent Away From Flat Side

LF45 TO-92 Component Formed To TO-18 Pattern (.10” Pin Circle) Center Lead Bent Toward Flat Side

LF46 Horizontal 90° 3-Lead Stagger, Middle Lead Outward With Leads Bent Toward Heatsink

LF47 Vertical With Center Lead Offset at Body Away From Heatsink

LF48 Vertical With Center Lead 90° Offset Away From Heatsink

LF49 Horizontal 90° In-Line, Leads Bent Toward Heatsink

LF50 Vertical With Center Lead Offset Away From Heatsink

LF51 Horizontal 90° 3-Lead Stagger, Center Lead Inward With Leads Bent Toward Heatsink

LF52 Vertical 3-Lead Offset, Center Lead Away From Heatsink

LF53 Horizontal 90° 3-Lead Stagger, Middle Lead Outward With Leads Bent Away From Heatsink

LF54 3-Lead In-Line Vertical Stand-Off With Center Lead Lock-In

LF55 3-Lead In-Line Vertical Flushmount With Center Lead Lock-In

LF56 Horizontal Flushmount 90° Bend (Encapsulated Body)

LF57 Horizontal Stand-Off 90° Bend (Encapsulated Body)

LF58 Dip Package 90° Bend

LF59 Wire Cut & Strip