STATGUARD DISSIPATIVE FLOOR FINISH 55 GAL DRUM
- Static Dissipative Cross-Linked Floor Finish
- Dissipative (1 x 106 to < 1 x 1010 ohms) Coating – ANSI/ESD S7.1 and ESD TR53
- Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2
- 18% Solids- 3 Coat System
- UL Listed for Slip Resistance
- Bag-In-Box Packaging
- Lead-free RoHS Compliant
- Trouble shoot common floor care problems. Click HERE.
- Made in the United States of America
This item is made and stocked in Canton, MA
Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring.
Reduces labor needed for initial install and on-going maintenance of the floor
Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
Click Here for Clean Room and Raised Floor application instructions
Important Safety Feature |
Safe Walking Surface |
Classified by UL as to slip resistance only, Statfree® and Statguard® provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree® and Statguard® and tested them to their slip resistance standards. To ensure employee safety and to mitigate user’s liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained. |
RTT: 10E7 ohms per ANSI/ESD S4.1 @ 50% R.H. | pH: 8.9 |
Coverage: 2,000 sq. ft/gallon | Solids: 18% |
Density: 8.4 lbs./gal | Water soluble |
Weight | 492 kg |
---|---|
Country of Origin | USA |
CA Prop 65 | FALSE |